packaging & ordering information: product lead ampere symbol rating package code gda blank (none) s501? v axial leads gda only .032 9 x 1.5 9 copper tinned markings: mfg mark, rated current, rated voltage, characteristic symbol, breaking capacity symbol, approvals where applicable. ? s501 is a european designation. in north america use gda respectively when referencing product, except 8 and 10a. 5 x 20mm ferrule fuses gda fast acting, high breaking capacity gda-v form no. gda page 1 of 2 bif doc #2014 bussmann 12-18-98 sb98107 rev. a catalog symbol: gda fast acting high breaking capacity 250 volts ac or less ul recognized: (guide #jdyx2, file #e75865) limits for pre-arcing time 1.5 in 2.1 in 2.75 in 4 in 10 in in min max min max min max max 50ma - 3.15a 60 min. 30 min. 10 ms. 2 sec. 3 ms. 300 ms. 20 ms. 4a - 10a 60 min. 30 min. 10 ms. 3 sec. 3 ms. 300 ms. 20 ms. 1.1 in: ? t 2 70?, 125ma - 3a. 1.0 in: ? t 2 70?, 4a. 20mm ( 0.5) 5.2mm (+0.1/-0.2) 10mm ( 2.0) 38.10mm ( .38) 21.10mm ( .81) .81mm (ref) 38.10mm ( .38) 5.54mm ( .20) dimensional data .1 1 10 100 current in amperes 100 10 1 .1 .01 time in seconds ampere rating 6.3a 5a 4a 3.15a 2.5a 2a 1.6a 1.25a 1a 800ma 630ma 500ma 400ma 315ma 250ma 200ma 160ma 125ma 100ma 80ma 63ma 50ma ceramic tube - end caps: nickel or silver-plated brass. time-current characteristic curves?verage melt ce logo denotes compliance with european union low voltage directive (50-1000 vac, 75-1500 vdc). refer to bif document #8002 or contact bussmann application engineering at 314-527-1270 for more information.
5 x 20mm ferrule fuses gda fast acting, high breaking capacity gda-v form no. gda page 2 of 2 bif doc #2014 bussmann 12-18-98 sb98107 rev. a the only controlled copy of this bif document is the electronic read-only version located on the bussmann network drive. all ot her copies of this bif document are by definition uncontrolled. this bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applicatio ns. bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. bussmann also reserves the right to change or update, withou t notice, any technical information contained in this bulletin. once a product has been select- ed, it should be tested by the user in all possible applications. current rated voltage power pre-arcing rating voltage breaking drop dissipation value (in) (v) capacity (mv) max. (w) max. (i 2 t) (a 2 s) typ. 50ma 9000 1.1 0.0017 63ma 3300 0.36 0.0005 80ma 2600 0.44 0.0011 100ma 2300 0.52 0.0018 125ma 1900 0.6 0.0037 160ma 1600 0.64 0.008 200ma 1350 0.75 0.020 250ma 1300 0.82 0.027 315ma 1400 1.1 0.010 400ma 1500a 1200 1.2 0.018 500ma 250 250v, 50hz 1050 1.3 0.038 630ma cos ? ? 0.7 - 0.8 1200 1.5 0.064 800ma 490 1.3 0.097 1a 230 0.83 0.480 1.25a 200 0.83 0.9 1.6a 180 0.83 1.9 2a 205 1.5 2.0 2.5a 190 1.6 3.9 3.15a 160 1.7 8.1 4a 160 1.9 14 5a 155 2.5 25 6.3a 150 3.0 48 8a* ** 140 100 10a* ** 140 160 *iec standard 127, sheet i does not include ratings above 6.3a. **product is available only as s501 series. electrical characteristics bsi vde semko imq ur
|
